Acratex® AcraPrime® Water Based
About Acratex® AcraPrime® Water Based
Areas to use
Surfaces
Masonry substrates
Previously Painted Surfaces
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Brush, roller
Brush, roller, conventional or airless spray.
Product should be thoroughly mixed before use. Refer to the Dulux Acratex Application Manual for detailed application instructions.
Dulux Acratex Acraprime Water Based may be applied by roller, conventional or airless spray. A brush is required to cut in around edges and obstacles.
Airless/Conventional Spray
Typical airless set-up: Graco Ultra 500 using 0.011-0.013 spray tip at approx. 1000 psi.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
For more information visit painttakeback.co.nz or paintback.com.au
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Access everything you need at your fingertips
Shop smart, shop easy
Download the app to access the benefits of a DuluxTRADE account on the go.
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days.
Access technical product information and create project specifications.
