Take on any project

Study Project
Go monochromatic for a workspace that inspires big ideas. And give your walls and furnishings an industrial feel with Dulux® Design Effects Stainless Steel Effect, Dulux Duramax® and Dulux Aquanamel® finishes.
Your Shopping List
- Dulux Design Effects in your chosen colour
- Dulux Aquanamel Semi Gloss in your chosen colour
- Dulux Duramax® in your chosen sheen and colours
- Undercoat/stain blocker (if required)
- High quality synthetic brush for cutting in
- Medium nap (10-18mm) synthetic roller for walls
- Short nap (5-10mm) synthetic roller for toy box
- Paint pot – for cutting in
- Roller tray
- Roller extension pole
- Drop sheets
- Painter’s masking tape
- Cloth
What to consider before you start
Walls
- Follow the preparation steps.
- Start by cutting in around the edges of the wall with a brush – these are areas the roller cannot easily reach.
- Load the roller in the tray with a reasonable amount of paint.
- Start rolling the wall in an ‘M’ pattern. Start closest to the natural light source. Continue over the same section until the wall is evenly covered.
- Using an unloaded roller begin in the top left corner of your wall and gently let the roller roll down to the baseboards in a straight line with no pressure. A lightness of touch will prevent new roller marks from forming. Repeat this action only this time, slightly overlap your last movement so your roller rubs away the line created by the previous stroke. Continue this across the area you have painted. This is called laying off.
- Reload your roller and apply a second and third coat. Stainless Steel Effect always requires a third coat.
- For a brushed finish, lay off lightly with a wide brush.

Dulux Design Stainless Steel Effect
Gives a sleek, stylish stainless steel appearance to feature walls, architectural features and home accessories.
Desk & Drawers

- Follow the preparation steps.
- For technique, start by cutting in around the edges of furniture piece.
- Apply paint to the surface using short, horizontal brush strokes.
- Smooth over the painted section with long brush strokes. Do not reload the brush when you do this. Don’t brush it too much – a few strokes should be enough to smooth the surface.
- Use a roller to paint in the middle section.
- Repeat this process until complete. Allow to dry, then give the surface a light sand with 400 grit sandpaper and repeat for a second coat.
Dulux Aquanamel Semi Gloss
Dulux Aquanamel can be used in place of traditional oil based enamels, which not only saves time, but has the added benefit of paintwork not turning yellow with time. Click here to order online for delivery to your door.
Ornaments
- Follow the preparation steps.
- If using Dulux Duramax Black Satin and Dulux Duramax Metallic Finish Silver apply in multiple light, mist coats.
- Follow after spraying instructions on this guide.
- Now, admire your transformation! Great job!
Dulux Duramax Metallic Finish Spray Paint
High performance metallic finish for special projects inside and outside the home|Ideal for use on surfaces such as metal, wood and most plastic|5 colours available

More Winter Project Guides
Lounge Room Project
The lounge room becomes a sanctuary over the cooler months.
Playroom Project
Walls can set boundaries or they can free the imagination.
Hallway Project
Your entrance and hallway are where first impressions are made.
Reading Nook Project
With our premium finishes and on-trend effects you can turn an unused corner of a room into a cosy reading retreat.
Tween Room Project
Get your tween involved in a weekend bedroom project and let their individuality shine.
Share
Study Project