Dulux Renovation Range Tiles & Benchtops require a clean surface to adhere to. All grease and dirt contamination must be removed or the paint will not adhere and will peel or flake off.
On all surfaces cleaning is the most important step. IMPORTANT: Do not use abrasive cleaning detergents.
Repeat this process using clean water, at least twice.
Sand glossy and semi gloss finishes to a dull flat finish using p400 paper before coating.
Use a clean damp cloth to remove any dust.
Use a stainless steel wool pad to lightly abrade laminate surfaces.
Mask using a good quality painters tape.
Add all of the additive found underneath the blue lid to the primer first. When finished priming, repeat the process with the topcoat. Stir well for approximately 2-5 minutes with a broad flat paddle, using an up and down scooping action until the additive is completely mixed into the primer or the paint. Once mixed the primer is suitable to use for up to three days. The topcoat once mixed is suitable for up to 10 days.
After the additive has been added and stirred, apply Dulux Renovation Range Primer. For full instruction see label.
After the additive has been added and stirred, apply at least two coats of Dulux Renovation Range Tiles & Benchtops ensuring that the previous coat is left for a minimum of 8 hours before recoating.
Cut in as necessary using a 38–50mm high quality angled sash cutter brush.
Coat surface using a 4mm nap 100mm wide microfibre roller
Lay off. Once each section is coated, gently go over the surface in the same direction with an unloaded roller using minimal pressure. This will give a smooth consistent finish.
Discover how easy it is to paint kitchen, bathroom or laundry benchtops in your home with the Dulux Renovation Range Tiles and Benchtops.
Rejuvenate your benchtops with ease using Dulux Renovation Range Tiles & Benchtops.
1. Get started with your shopping list.
2. Dulux Renovation Range Tiles & Benchtops, requires a clean surface to adhere. All grease and dirt contamination MUST be removed, or the paint will not adhere and will peel or flake off. On ALL surfaces cleaning is the most important step. Scrub down all areas with Selleys® Sugar Soap and rinse with clean water to remove any dirt, oil or grease.
3. After the additive has been added and stirred, apply at least two coats of Dulux Renovation Range Tiles & Benchtops ensuring that the previous coat is left for a minimum of 8 hours before recoating.
Dulux Renovation Range Tiles & Benchtops is a revolutionary, water based interior coating perfect for transforming your bathroom tiles. For best results apply 1 - 2 coats of Dulux Renovation Range Clear (Satin or Gloss) as final coats.
Benchtops: Stony River
Cabinet Doors: Cardrona
Dulux Colour Ambassador Evie Kemp's kitchen was very functional and - compared to the rest of her (colourful!) house very stark and white. She was able to update her kitchen to her own unique style and bring in warmth and brightness with her choice of fun colours.
Yes, provided that the area where Renovation Range is intended to be used on is covered and will not be subjected to direct rain and weather. The Renovation Range products are based on UV resistant and water-resistant resins. As such they are capable of resisting undercover outside exposure.
Typically, benchtops in the kitchens, bathrooms and laundries we expect Renovation Range to be used on benchtops made from laminate. However, if they are made from tiles or natural stone – other than marble – they can be coated.
The Renovation Range products are NOT scratch proof but have good wear character that develops over a period of days.
It is important not to use knives or other instruments to cut, smash or otherwise impact the surface during preparation of food. These activities should always be done on a separate cutting board or similar.
Where possible, “lift and locate” heavy items on benchtops coated with Renovation Range to avoid pushing them across the surface and potentially causing a scratch.
Mask stoves, dishwashers and other appliances with smooth painter’s tape. Be diligent about pressing in the edge to ensure none of the coating will bleed through. Place drop cloths over surfaces not to be coated especially floors.
Colours displayed should be used as a guide for your colour selection. To ensure best accuracy, test your colour choice at home by ordering Dulux Sample Pots and Large Colour Swatches.