Cracking or flaking is the splitting of a dry paint film. This is a problem that needs fixing as it can lead to complete failure of the paint. Initially, the problem appears as a hairline crack, before evolving to flaking of paint chips.
Cracking and flaking is caused by:
- Use of a lower quality paint that has inadequate adhesion and flexibility
- Over thinning the paint or spreading it too thin
- Poor surface preparation, especially when the paint is applied to bare timber without priming
- Painting under hot or windy conditions that make water-based paints dry too fast
If caught early, it may be possible to correct superficial cracking by simply removing the loose or flaking paint with a scraper or wire brush, sanding to feather the edges, perform necessary repairs and spot- prime any bare spots before top coat application. However, if the cracking extends to the substrate, remove all affected paint by scraping, sanding and/or using a heat gun prior to painting.
More problem solving advice
Have you noticed that there are areas of denser colour or higher gloss where wet and dry layers overlap during painting? For each problem you’ll find a guide to identifying it, its causes and solutions.
If you’ve noticed black, grey or brown areas on your painted surface, chances are you’re dealing with a mould problem. For each problem you’ll find a guide to identifying it, its causes and solutions.