The easiest way to a modern new look

Take on your next benchtop project with the Dulux Renovation Range.

How it works

Check out our How-to videos to learn more about the range.

Benchtop Project

Rejuvenate your benchtops with ease using Dulux Renovation Range
Tiles & Benchtops.

1. Get started with your shopping list. Download project guide for
the entire list

2. Dulux Renovation Range Tiles & Benchtops, requires a clean
surface to adhere. All grease and dirt contamination MUST be
removed, or the paint will not adhere and will peel or flake off. On
ALL surfaces cleaning is the most important step. Scrub down all
areas with Selleys® Sugar Soap and rinse with clean water to
remove any dirt, oil or grease.

3. After the additive has been added and stirred, apply at least two
coats of Dulux Renovation Range Tiles & Benchtops ensuring that
the previous coat is left for a minimum of 8 hours before recoating.
Dulux Renovation Range Tiles & Benchtops is a revolutionary,
water based interior coating perfect for transforming your bathroom
tiles. For best results apply 1 - 2 coats of Dulux Renovation Range
Clear (Satin or Gloss) as final coats. Find out more.

Colours featured: Maraetai
Benchtops: Stony River
Cabinet Doors: Cardrona



1.Clean & Prep

Clean with Selleys Sugar Soap

2. Topcoat

Tiles & Benchtops

3. Final Touches

Clear Coats available in gloss and satin. Grout Pen available in white.

Popular colours

We’ve selected our most popular colours. For more inspiration and colours view all colours here.

Loading colours

Colours displayed should be used as a guide for your colour selection. To ensure best accuracy, test your colour choice at home by ordering Dulux Sample Pots and Large Colour Swatches.

You might also like


Get started

Ready to get started? Find your nearest Dulux retailer.

Find a store

Download your project guide

Take on your next benchtop project with the Dulux Renovation Range.



  • What sizes does Renovation Range come in?

    Renovation Range is available in 1L size and 2L for Cabinet Doors

  • What should I use to clean surfaces that will be painted?

    Use a non-abrasive grease and oil cutting cleaner like Selleys Sugar Soap. Clean the surface at least twice with clean water and Sugar Soap each time. Clean until the cleaning water and Sugar Soap remain clean.

    Do not use abrasive cleaning compounds. Abrasive scouring pads should be used when cleaning before painting.

  • Can I use Renovation Range outside?

    Interior only product. We designed the paints using Acrylic Resins so that the product can resist yellowing and fading in direct sunlight through a window. However, they are not designed for exterior use.

  • What is the coverage of Renovation Range products?

    All of the products have been designed to deliver 12m2/L per coat.
    To establish the amount of paint you require follow the calculation below.

    1: Work out the total area that you wish to coat.
    2: Multiply by 2 for the number of coats required.
    3: Divide by 12 to establish litres required.
    4: Multiply the litres by 1.3 to allow enough for 30% excess to allow for waste, roller and brush loading and retention in the can and roller tray.

    Where figures are less than full litres round up to full litres.
    e.g for a 10m2 of surface. 10 X 2 = 20 20/12 = 1.67 1.67 X 1.3 = 2.17
    Round up to 3 litres.

  • Can Renovation Range be applied to glazed terracotta tiles?

    Yes, Renovation Range Floors can be applied to properly cleaned and prepared Glazed Terracotta Tiles.

  • Download project guides:


For project advice, contact Help & Advice on 0800 800 424