Dulux Duramax Marble Finish is a specialty spray paint that delivers an elegant, marble finish on top of existing Dulux Duramax Decorative colours.


  • High performance, elegant, marble finish effect for special projects inside and outside the home.
  • Simply, apply over Dulux Duramax topcoat (with exception to Bright Finishes, High Heat or Fluoro products)
  • Touch dry 30 minutes
  • Available in 300g


  • Vintage, marble finish effect.
  • Interior and Exterior Projects

Product code: 31VD1272


Ideal for use with all Dulux Duramax Decorative colours,Use on wood, metal, glass and ceramics

Surface preparation

The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray. Undercoat dark surfaces with Dulux Duramax Undercoat to achieve the brightest finish. Prime all bare steel and iron with Dulux Duramax Metal Primer. Prime all plastic with Dulux Duramax Plastic Primer. Shake can for at least three minutes before use and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C. It is not recommended to recoat as the Marble effect will be disturbed. 1 - 2 passes over an area will give enough effect to provide a strong marbling result.

Product downloads


Timber, Metal, Glass, Ceramics

Application Guide

Application Method
Aerosol Spray Paint

Health Safety

Clean Up
Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.