Metalshield® Brush Thinner
About Metalshield® Brush Thinner
Dulux Metalshield® Brush Thinner is designed to be used with the Metalshield® topcoat range. Metalshield® Brush Thinner can be used to aid surface preparation, increased workability and to clean up equipment.
Downloads
Application
At a glance
- Paint thinner and cleaner
- Slow evaporating for increased workability
- Suitable for surface preparation and cleaning
- Available in 1L
Areas to use
Surfaces
Thinning of Metalshield® Premium and Metalshield® Epoxy coatings, surface preparation and equipment cleaning.
• Metal
• Steel
• Wrought iron
• Galvanised iron
• ZINCALUME®
• Aluminium
• Copper
• Brass
• Stainless steel
Brush, roller
• Dulux Metalshield® Brush Thinner must only be used with the Dulux Metalshield® products listed.
• Stir paint contents thoroughly with a broad flat stirrer using a stirring, lifting action before adding Dulux Metalshield® Brush Thinner.
• Thin in accordance with the directions on Dulux Metalshield® product labels for brush, roller and spray application.
• Stir well prior to applying the Dulux Metalshield® paint product.
Use with Dulux Metalshield® Premium and Dulux Metalshield® Epoxy Enamel.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit painttakeback.co.nz
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
