Concrete & Paving Sealed Surface Primer
About Concrete & Paving Sealed Surface Primer
Dulux Concrete & Paving Sealed Surface Primer is the second stage in preparing the surface for the finishing coat. It is formulated for use over any existing coating to reinforce the surface for optimal adhesion of subsequent coats of paint.
Downloads
Application
At a glance
- Available in 1L or 2L
- Ideal for pebble, stone brick & previously sealed surfaces
- Prepares surface for Dulux Concrete & Paving Stage 3: Finish
Areas to use
Surfaces
Brick paving – clear coated, Brick paving – bare, Terracotta tiles – unglazed, Terracotta tiles – glazed, Ceramic tiles, Faux bricks, Pattern paving, Exposed aggregate*, Pebble concrete*, Pebblecrete*, Pebble Mix*, Slate, Sandstone, Limestone, Bluestone, Natural stone other, Granite, Basalt, Asphalt.
* Due to the uneven nature of this surface there will be localised premature wear and tear in some high areas of the surface. This may require a shorter maintenance schedule than other flat surfaces.
Brush, roller
1. Stir thoroughly before and during use.
2. Add all Part B material, found in the tube under the cap, into the can and mix thoroughly with a flat stirrer for 1-2 minutes.
3. Mask all adjacent surfaces not needed for the application.
4. Use a brush to apply to any edges and hard-to-reach places.
5. Use a roller to apply 1 coat evenly across the surface.
6. Gently go over the surface in the same direction with an unloaded roller using minimal pressure to give a smooth consistent finish.
7. Allow the coated surface to dry.
NOTE: Once you have added the Part B material, the product needs to be used within 3 days.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Get in touch with our local Customer Service team by calling 0800 800 424. The Dulux Customer Service team are experts available to assist with colour, product and service questions.
- Prepares sealed surfaces for coatingCleans tough oil and grease stainsRelated to: Concrete & Paving Sealed Surface Primer
- Easy to applyCreates a consistent surface for optimum adhesionRelated to: Concrete & Paving Sealed Surface Primer
- Prepares concrete for primingRoughens concrete surface for optimum adhesionRelated to: Concrete & Paving Sealed Surface Primer
- Protects the look of the surfaceEasy to applyNon-yellowingRelated to: Concrete & Paving Sealed Surface Primer
- Non-yellowingProtects the look of the surfaceEasy to applyRelated to: Concrete & Paving Sealed Surface Primer
- Superior durabilitySlip resistantTintable to Dulux coloursRelated to: Concrete & Paving Sealed Surface Primer
- Slip resistantSuperior durabilityTintable to Dulux coloursRelated to: Concrete & Paving Sealed Surface Primer
- Tintable to Dulux coloursWithstands high trafficP5 Slip rating in 2 coatsRelated to: Concrete & Paving Sealed Surface Primer
- Mix in to Dulux Concrete & Paving Clear Protective Sealer.Mix in to Dulux Concrete & Paving Clear Protective Sealer.Related to: Concrete & Paving Sealed Surface Primer
