Features
- Super Durable Polyester thermosetting Powder Coating
- Warranty* performance on alumnium: 20 year durability warranty, 15 year chalk and colour fade warranty on pre-treated architectural aluminium when applied by a Dulux Registered Applicators
- Warranty* Extensive range of colours, finishes and gloss levels
- Formulated to meet: AS 3715 and AAMA 2604
Benefits
- Guaranteed performance on appropriately pre-treated aluminium and steel - see warranty* details
- Excellent colour retention
- Hard wearing/serviceable finish
- Ideal for interior projects and exterior residential and commercial projects further than 10 metres from the high tide line
Product code: 900
Uses
Developed primarily for use on extruded aluminium, including window and door joinery, and extruded aluminium panel work on residential and commercial buildings. Duratec is also suitable for use over a variety of other substrates including mild and Galvanised steel.
Surface preparation
Surfaces should be prepared according to appropriate standards such as AAMA 2604, and AS3715 (available from Standards Australia or Standards New Zealand offices).
Product downloads
- Coverage
- 8 - 10m2/kg corresponds to 80 microns
- Surfaces
- Galvanised Steel, Stainless Steel, Steel (mild), Zincalume, Non ferrous metals, Aluminium
- Type
- Powder Coating
- Range
- Duratec Powdercoat Range
- Film Build
- Minimum 50 microns, Maximum 110 microns
- Application Method
- Electrostatic Spray
- VOC Level
- Virtually zero (please consult Dulux for details)
- Weatherability
- Excellent resistance to weathering.
- Salt Resistance
- Excellent salt spray resistance over pre-treated aluminium (3000 hours ASTM B117)
Cure Schedule
- Metal Temperature
-
210° : 4 mins (Gloss and Satin Products) minimum 210° : 8 mins (Matt Products) minimum 200° : 5 mins (Gloss and Satin Products) minimum 200° : 10 mins (Matt Products) minimum 180° : 8 mins (Gloss and Satin Products) minimum 180° : 15 mins (Matt Products) minimum
Specifications
How to Specify Example Aluminium Specification Dulux Duratec Tuatara Kinetic 9007572K to meet AAMA 2604. Product must be applied by a Dulux Registered Aluminium Applicator and may offer 20 year durability warranty.
- Care and Maintenance
-
Refer to AAMA 609 and 610
As a general rule, cleaning of externally located powder coating surfaces must take place every six months. Where salts/pollutants are more prevalent such as seaside, industrial and geothermal areas, a cleaning program should be carried out more frequently.
THREE STEPS TO CLEANING POWDER COATED SURFACES
- Remove loose deposits with a wet sponge (avoid scratching the surface by dry dusting).
- Using a soft clean cloth and a mild detergent in warm water, clean the powder coating to remove dust, salt or other deposits.
- Always rinse after cleaning with fresh water to remove any remaining detergent.
WARNING
In some cases, strong solvents recommended for thinning various types of paints and also for cleaning up mastics/sealants are harmful to the extended life of the powder coated surface. These solvents should not be used for cleaning purposes and will render the warranty void if used. If paint splashes or sealants/mastics need to be removed then the following solvents can be used safely: Methylated Spirits, Ethyl Alcohol, Isopropanol.
- Warranty Information
-
Warranty* performance on alumnium:
- 20 year durability warranty
- 15 year chalk and colour fade warranty (Zeus and Eternity)
- 10 year chalk and colour fade warranty (Intensity)
On pre-treated architectural aluminium when applied by a Dulux Registered Applicators
Warranty* performance on steel:
- Up to 10 years durability warranty
- 15 year chalk and colour fade warranty (Zeus and Eternity)
- 10 year chalk and colour fade warranty (Intensity)
As part of the steel shield warranty system when applied by a Dulux Registered Applicators
Share
product details