Dulux Professional Interior Low Sheen produces a high quality low sheen finish. Recommended for interior broadwall surfaces, can be tinted to all Dulux colours.
Features
- Water based
- Low sheen finish
- Available in 4L, 10L, 15L
- Available in White
Benefits
- Same day recoat
Product code: 587
Uses
DULUX PROFESSIONAL Interior Low Sheen Acrylic can be used on interior walls.
Surface preparation
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas. Note: To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.
Product downloads
- Type
- Wall
- Area
- Wall
- Range
- Professional
- RoomSpace
- Bedroom, Living room, Hallway, Dining room, Laundry, Bathroom, Kitchen
- Application Method
- Roller, Brush, Airspray, Con-Spray
Performance Guide
- Gloss Level
- 5-10 units
- VOC Level
- <70g/L
Health Safety
- Clean Up
- Clean all equipment with water
Share
product details