Dulux Weathershield Render Refresh is a high build exterior render and masonry crack bridging paint that helps to bridge fine cracks.


  • Crack bridging paint
  • Easy application
  • Helps resist mould dirt and stains
  • Available in Light base
  • Available in 4L, 10L


  • Helps hide fine cracks
  • Dulux Promise - Will not peel, flake or blister for as long as you live in your house*
  • Ideal for rendered and masonry surfaces
  • Made in New Zealand

Product code: 51R


Designed for previously painted bricks, concrete, fibre cement board and masonry. The High build formula helps to fill & bridge fine cracks.

Surface preparation

All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint. Efflorescence or mould on masonry or concrete surfaces must be treated before painting. New concrete, mortar and cement render must be allowed to cure for 4 to 8 weeks depending on concrete thickness and drying conditions. Fill holes in masonry with grouting cement. Wash down with water with a stiff brush to remove all loose material. Check the adhesion of previously painted surfaces by cutting an X through the film with a sharp blade, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before repainting.

Product downloads


6 square metres per L
Brick, Concrete, Fibre Cement, Masonry

Application Guide

Application Method
Roller, Brush, Spray.

Health Safety

Clean Up
Clean all equipment with water
Warranty Information
*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Consumer Guarantees Act 1993.