Looking to make a change to your feature wall? Thankfully removing your old Dulux Design Effects paint is simple when you’re ready for a new look.
Before your new look can go up, your old one must come down. To do that you’ll need 80-120 grit sandpaper, a drop sheet and some good quality masking tape.
Once your wall has been cleaned and dried, lightly sand the existing paint surface using an 80-120 grit sandpaper. When most of the effect has been removed, use a damp cloth to attract excess dust.
Once you’ve masked off your wall, paint the edges, corners and anything you’ve taped off.
Gently roll onto the surface in a series of close zigzag motions. Then continue to re-roll the area with parallel strokes to create a smooth finish. This technique can be used to complete the remainder of the wall.
Now that your pre-coat is complete, you can begin applying your newly inspired colour or finish.
Do this before applying your Dulux 1Step® Prep Primer, Sealer & Undercoat. This product has excellent hiding power and filling properties, making it ideal for covering dark or lightly textured surfaces.
Make confident decisions about your project needs with support from our wide network of painters or speak to one of our Customer Service consultants now.