Features
- Formulated with metallic aluminium flake
- Premium rust prevention system
- Maximum resistance to UV damage
- Withstands temperatures up to 200˚C
Benefits
- Provides sleek aluminium finish
- Lamella aluminium flakes provide extra barrier for rust protection
- Exterior durable
Product code: 38463008
Uses
Metallic finish for heat reflection. Generally used as part of a protective coating system in: ducting, exposed pipelines, miscellaneous metalwork, silos, tank exteriors.
Surface preparation
Ensure the surface has thoroughly dried prior to application. Commercial applications may require additional surface preparation.
PRE-PAINTED METAL SURFACES: Scrape off all loose and flaking paint. Sand all surfaces to a flat finish. Dust off. If previously painted surface is in good condition then no primer is required. Treat any bare metal as below.
AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield All Surface Primer.
NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield All Surface Primer.
GALVANISED IRON/ZINCALUME®: Clean surface with sugar soap and a Scotch-Brite® Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield Etch Primer.
ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite® Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield All Surface Primer.
Product downloads
- Surfaces
- Steel, Aluminium, Galvanised steel
- Type
- Protective Coatings
- Area
- Ducting, Gutter, Roof, Gate, Fence, Pipeline
- Range
- Metalshield
Share
product details