Drive innovation and engagement with Dulux Professional DryErase™. The whiteboard paint that is transforming the way people work and learn by turning a painted surface into an erasable canvas.
Use our premium high performance Dulux Professional DryErase™ paint on walls, doors or columns to create unique spaces for brainstorming or planning. Paint an entire room and create a 360° work environment. Unleash your full potential and break down obstacles to collaboration and innovation.
Dulux Professional DryErase™ is available in a White or Clear Coat 5m2 size kit. It is easy to apply and is suitable for both residential and commercial markets.
Who says a whiteboard has to be white? Dulux Professional DryErase™ Clear is a single coat, two pack, transparent paint that transforms a painted surface into an erasable canvas.
Dries to a clear semi gloss to gloss finish
Easy, wet-on-wet roller application
Erases clean
Use at work, home and school
Transform your office into a boundless erasable canvas, giving you the space to fully explore ideas.
Accelerate innovation by getting people on their feet working together in ways never before possible. Dulux Professional DryErase™ will improve the way people collaborate more effectively, be more creative and ultimately deliver better results.
There are no ideas too little, only little spaces to put them.
Dulux Professional DryErase™ will transform classrooms into boundless erasable surfaces, giving teachers and students the space they need to communicate, connect and accelerate learning. Turn walls, desks and even old chalkboards into more functional and fun spaces.
Dulux Professional DryErase™ turns any home into a space that will keep the family organized, entertained and connected.
Transform a kitchen wall into an erasable message board or paint a toy box to make it more interesting than everything inside. It’s perfect for the home office, playroom, or any room, where ideas happen. Infuse fun and functionality into unexpected spaces.
Dulux Professional® DryErase™ is only for application by professional applicators on prepainted surfaces and suitably prepared new surfaces.
The product will only be as smooth as the surface it is painted on, so make sure the surface is of good quality and prepared according to the instructions.
Use Dulux Professional® DryErase™ in rooms that are maintained at temperatures between 20°C and 30°C and below 85% relative humidity.
Measure the area to be painted, height x width = square metres.
Dulux Professional® DryErase™ is formulated to provide coverage up to the indicated size on your kit by ensuring sufficient film build is attained. DO NOT overspread, as this will reduce product performance.
FOR DULUX PROFESSIONAL DryErase
Ventilate: Open doors and windows to ensure good ventilation
For further product or application advice or a Safety Data Sheet contact Dulux Customer Service NZ 0800 800 424
Open doors and windows to ensure good ventilation.
For further product or application advice or a Safety Data Sheet contact Dulux Customer Service on 0800 800 424.
New surface
Wipe with a clean dry cloth to remove any dust. Apply one coat of Dulux Professional® Total Prep® according to product instructions.
For set plaster apply Dulux Sealer Binder or Dulux Professional® Water Based Sealer Binder followed by Dulux Professional® Total Prep®.
Pre-painted surface
If the surface is in sound condition wipe with a clean dry cloth to remove any dust. No primer required.
For surfaces that require preparation:
- Repair any divots, scratches, or bumps on the wall by filling them.
- If the wall is textured, sand it smooth – or, for heavy texture use a level 5 finish.
- Next apply one coat of Dulux Professional® Total Prep® Acrylic, according to product instructions.
- Dulux Professional® Dry Erase™ will only be as smooth as the surface you apply it to.
Important
Apply all prep coats and topcoats with a 5-8mm nap roller sleeve for the least amount of roller stipple. Allow all coatings to fully dry for 24 hours prior to applying Dulux Professional® DryErase™.
New surface
Prior to applying Dulux Professional® DryErase™ Clear, apply a water-based low sheen, semi gloss, or gloss topcoat, in the colour of your choice, according to product instructions.
Do not use an oil-based topcoat.
Dulux Professional® DryErase™ Clear performs best over a semi gloss or gloss finish. For the best performance of Dulux Professional® DryErase™ do not paint over a flat or matt finish.
Pre-painted surface Dulux Professional® DryErase™ Clear performs best over a semi gloss or gloss finish, though can be used over a low sheen finish. For the best performance of Dulux Professional® DryErase™ do not paint over a flat or matt finish.
Prior to applying Dulux Professional® DryErase™ Clear, if required, apply a water-based, semi gloss or gloss topcoat, in the colour of your choice, according to product instructions. Do not use an oil-based topcoat.
Important
Apply all prep coats and topcoats with a 5-8mm nap roller sleeve for the least amount of roller stipple. Allow all coatings to fully dry for 24 hours prior to applying Dulux Professional® DryErase™.
YOU HAVE TWO HOURS TO APPLY
Open doors and windows to ensure good ventilation.
Follow all safety precautions outlined on the PART A and PART B cans.
Applying the Dulux Professional DryErase over a semi gloss or gloss acrylic coat will deliver the best holdout and maximise performance of the topcoat.
Only apply Dulux Professional® DryErase™ with the supplied roller sleeve, ensuring you remove any lint before beginning. Use a new roller sleeve with each new kit and dispose of used sleeve.
Use Dulux Professional® DryErase™ in rooms that are maintained at temperatures between 20°C and 30°C and below 85% relative humidity.
Application instructions
Dulux Professional® DryErase™ dries quickly. Apply in sections up to one metre wide by the entire height.
Cut in edges using a small 4-5mm short nap microfibre roller.
Dulux Professional® DryErase™ is applied in a two coat process:
For areas up to 5m²: Pour half of the mixed product into the tray and apply the first coat of Dulux Professional® DryErase™ over the area (up to 5m²) with the roller sleeve provided. The first layer should be a thin, consistent coat over the whole area being coated. Allow a minimum of 30 minutes for this first coat to dry. During this time, wrap the roller in cling wrap plastic or foil to keep the roller moist. Also, cover the tray with cling wrap plastic or foil to avoid it drying out or wipe the tray clean before adding the remaining mixture. Pour remaining mixture into the tray and apply the second coat. The first coat may be slightly tacky after 30 minutes but can still be overcoated. The pot life will be two hours depending on conditions. Ensure the two coats are completed within the pot life of the product.
For areas between 5m² and 10m²: Mix one kit and use this to apply one even first coat over the entire area (up to a maximum of 10m²). Allow a minimum of 30 minutes (or a maximum of 24 hours) to dry prior to applying the second coat with a new fresh kit.
For areas greater than 10m²: Mix one kit at a time and use this to apply one even first coat over the first 10m² area. Use an additional kit for every 10m² until all of the area being painted has one even first coat. Allow a minimum of 30 minutes (or a maximum of 24 hours) to dry prior to applying the second coat.
Be sure to overlap sections by 5-10cms and back-roll the overlap for complete, consistent coverage.
Ensure a new roller sleeve (supplied) and new tray liner is used for every kit mixed or applied 10m² of product. This will avoid any possible cross-contamination.
Use good lighting when applying in order to ensure even coverage.
For further product or application advice or a Safety Data Sheet contact Dulux Customer Service on New Zealand 0800 800 424.
At the completion of your wall, any masking tape used should be removed immediately, ideally while Dulux Professional® DryErase™ is still wet, and clean up.
If you have drips on the carpet or skirting board, use water to clean those spots as soon as possible. For stubborn stains use Diggers Isopropyl Alcohol. If you get it on your hands wash immediately with soap and water.
If you are unable to remove tape before Dulux Professional® DryErase™ dries, score the edges with safety knife before removing the tape.
Allow seven days to fully cure before using.
Your finished Dulux Professional® DryErase™ surface will have slight “orange-peel” texture; this is normal and will not affect the performance or erasability of Dulux Professional® DryErase™. It is safe to use most dry erase style whiteboard markers on the Dulux Professional® DryErase™ surface.
Do not use EXPO® pink whiteboard markers, red whiteboard crayons or Crayola® dry erase markers. It is advisable to test novelty markers in an inconspicuous area first. Some novelty markers (for example “fluoro” markers) require wet-wipe removal.
Please refer to the specific novelty marker instructions for removal.
Diggers is a registered trademark of Recochem Inc. EXPO® is a registered trademark of Newell Brands. Crayola® is a registered trademark of Crayola.
Open doors and windows to ensure good ventilation.
For further product or application advice or a Safety Data Sheet contact Dulux Customer Service on 0800 800 424.
New surface
Wipe with a clean dry cloth to remove any dust. Apply one coat of Dulux Professional® Total Prep®, according to product instructions.
For set plaster apply Dulux Sealer Binder or Dulux Professional® Water Based Sealer Binder followed by Dulux Professional® Total Prep®.
Pre-painted surface
If the surface is in sound condition wipe with a clean dry cloth to remove any dust. No primer is required, except when applying Dulux Professional® DryErase™ White Coat over dark colours. For best coverage over dark colours, apply one coat of Dulux Professional® Total Prep® before applying Dulux Professional® DryErase™ White Coat.
For surfaces that require preparation
- Repair any divots, scratches, or bumps on the wall by filling them.
- If the wall is textured, sand it smooth – or, for heavy texture use a level 5 finish.
- Next apply one coat of Dulux Professional® Total Prep® Acrylic, according to product instructions.
- Dulux Professional® DryErase™ will only be as smooth as the surface you apply it to.
Important
Apply all prep coats and topcoats with a 5-8mm nap roller sleeve for the least amount of roller stipple. Allow all coatings to fully dry for 24 hours prior to applying Dulux Professional® DryErase™.
New surface
Dulux Professional® DryErase™ White and Black can be applied directly to properly primed surface.
Pre-painted surface
Dulux Professional® DryErase™ White and Black performs best over a semi gloss or gloss finish. For the best performance of Dulux Professional® DryErase™ do not paint over a flat or matt finish.
Do not apply Dulux Professional® DryErase™ over an oil-based topcoat or primer.
Important
Apply all prep coats and topcoats with a 5-8mm nap roller sleeve for the least amount of roller stipple. Allow all coatings to fully dry for 24 hours prior to applying Dulux Professional® DryErase™.
YOU HAVE TWO HOURS TO APPLY
Open doors and windows to ensure good ventilation.
Follow all safety precautions outlined on the PART A and PART B cans.
Applying the Dulux Professional DryErase over a semi gloss or gloss acrylic coat will deliver the best holdout and maximise performance of the topcoat.
Only apply Dulux Professional® DryErase™ with the supplied roller sleeve, ensuring you remove any lint before beginning. Use a new roller sleeve with each new kit and dispose of used sleeve.
Use Dulux Professional® DryErase™ in rooms that are maintained at temperatures between 20°C and 30°C and below 85% relative humidity.
Application instructions
Dulux Professional® DryErase™ dries quickly. Apply in sections up to one metre wide by the entire height.
Cut in edges using a small 4-5mm short nap microfibre roller.
Dulux Professional® DryErase™ is applied in a two coat process:
For areas up to 5m²: Pour half of the mixed product into the tray and apply the first coat of Dulux Professional® DryErase™ over the area (up to 5m²) with the roller sleeve provided. The first layer should be a thin, consistent coat over the whole area being coated. Allow a minimum of 30 minutes for this first coat to dry. During this time, wrap the roller in cling wrap plastic or foil to keep the roller moist. Also, cover the tray with cling wrap plastic or foil to avoid it drying out or wipe the tray clean before adding the remaining mixture. Pour remaining mixture into the tray and apply the second coat. The first coat may be slightly tacky after 30 minutes but can still be overcoated. The pot life will be two hours depending on conditions. Ensure the two coats are completed within the pot life of the product.
For areas between 5m² and 10m²: Mix one kit and use this to apply one even first coat over the entire area (up to a maximum of 10m²). Allow a minimum of 30 minutes (or a maximum of 24 hours) to dry prior to applying the second coat with a new fresh kit.
For areas greater than 10m²: Mix one kit at a time and use this to apply one even first coat over the first 10m² area. Use an additional kit for every 10m² until all of the area being painted has one even first coat. Allow a minimum of 30 minutes (or a maximum of 24 hours) to dry prior to applying the second coat.
Be sure to overlap sections by 5-10cms and back-roll the overlap for complete, consistent coverage.
Ensure a new roller sleeve (supplied) and new tray liner is used for every kit mixed or applied 10m² of product. This will avoid any possible cross-contamination.
Use good lighting when applying in order to ensure even coverage.
For further product or application advice or a Safety Data Sheet contact Dulux Help & Advice in Australia on 13 23 77 or New Zealand 0800 800 424.
At the completion of your wall, any masking tape used should be removed immediately, ideally while Dulux Professional® DryErase™ is still wet, and clean up.
If you have drips on the carpet or skirting board, use water to clean those spots as soon as possible. For stubborn stains use Diggers Isopropyl Alcohol. If you get it on your hands wash immediately with soap and water.
If you are unable to remove tape before Dulux Professional® DryErase™ dries, score the edges with safety knife before removing the tape.
Allow seven days to fully cure before using.
Your finished Dulux Professional® DryErase™ surface will have slight “orange-peel” texture; this is normal and will not affect the performance or erasability of Dulux Professional® DryErase™. It is safe to use most dry erase style whiteboard markers on the Dulux Professional® DryErase™ surface.
Do not use EXPO® pink whiteboard markers, red whiteboard crayons or Crayola® dry erase markers. It is advisable to test novelty markers in an inconspicuous area first. Some novelty markers (for example “fluoro” markers) require wet-wipe removal.
Please refer to the specific novelty marker instructions for removal.
Diggers is a registered trademark of Recochem Inc. EXPO® is a registered trademark of Newell Brands. Crayola® is a registered trademark of Crayola.
Applying the Dulux Professional DryErase over a semi gloss or gloss acrylic coat will deliver the best holdout and maximise performance of the top coat.
Only apply Dulux Professional DryErase with the supplied roller sleeve, ensuring you remove any lint before beginning.
Use a new roller sleeve with each new kit and dispose of used sleeve.
Use Dulux Professional DryErase in rooms that are maintained at temperatures between 20°C and 30°C and below 85% relative humidity.