Dulux Precision All Metal Primer is a water based primer designed for metal surfaces including galvanised iron, Zincalume®, wrought iron, steel, aluminium, copper, brass and stainless steel. Dulux Precision All Metal Primer has excellent adhesion and has been formulated with anti-corrosive pigments to inhibit rust and corrosion for the protection of metal surfaces.


  • Contains anti-corrosive pigments
  • Water based
  • Excellent adhesion
  • Available in 1L, 4L, 10L


  • Inhibits rust and corrosion
  • Fast drying, touch dry 20min, recoat 2hrs
  • Suitable for use under Dulux topcoats
  • Made in New Zealand

Product code: 51W89937


Galvanised iron, Zincalume®, aluminium, steel, wrought iron, copper, brass, Colorbond® or Colorsteel® and stainless steel. This product is suitable for domestic use only.

Surface preparation

Galvanised Iron New: Wash down surface with sugar soap and a Scotch-Brite® Pad to remove grease, oils and dirt. Rinse with clean water. Allow to dry. Aged or Rusted: Remove all rust by scraping, sanding or wire brushing. Wipe surface clean with mineral turps to remove residual rust, grease, oils and dirt. Allow to dry. Zincalume®, Aluminium, Copper, Brass & Stainless Steel. New or Aged: Wash down surface with sugar soap and a Scotch-Brite Pad to remove grease, oils, dirt and any corrosion. Rinse with clean water. Allow to dry. Colorbond® or ColorSteel® (NZ) pre-painted steel Aged: Ensure surface is sound by performing an adhesion test. Any loose or flaking paint needs to be removed. Spot prime bare areas with 1 coat of Dulux All Metal Primer. Ferrous Metals (Steel & Wrought Iron) New: Ensure surface is free from residual grease, oils and dirt by wiping with mineral turps. Aged or Rusted:

Product downloads

Galvanised Iron, Zincalume, Aluminium, Steel, Wrought Iron, Copper, Brass, Stainless steel, Colorbond®, Colorsteel®
Fretwork, Shed, Trailer, Letterbox, Fence, Gate
Interior & exterior metal surface
Application Method
Roller, Brush, Airspray, Con-Spray.

Drying Characteristics

Touch Dry
20 minutes
Re-Coat Time
2 hours

Health Safety

Clean Up
Clean up application equipment in water