The zinc-rich epoxy primer
Zincanode® 402 is an anti-corrosive zinc-rich two-pack epoxy primer. The key components are anti-corrosive pigment (finely divided zinc dust) and polyamide cured epoxy resin. Zincanode® 402 provides exceptional corrosion resistance in harsh exposures by sacrificial methods. Zincanode® 402 is recommended for use over abrasive blast cleaned steel surfaces in most harsh environments, especially where overcoating is required without special mist or seal coat techniques. Zincanode® 402 offers ease of application, high film builds without mud-cracking and exceptional adhesion to field weld areas cleaned by power sanding or power wire brushing.
The zinc phosphate epoxy primer
Duremax® GPE ZP is a two-pack epoxy steel primer formulated with zinc phosphate to offer active inhibitive protection to the steel against corrosion. The epoxy resin provides high strength adhesion to the substrate as well as excellent cohesion, binding the pigments together tightly to form a tough barrier offering additional passive barrier protection.
The zinc phosphate primer
Luxaprime® Zinc Phosphate is a single pack zinc phosphate primer offering good corrosion protection over power tool cleaned steel. The high build formulation allows higher film builds in fewer coats.
The surface tolerant epoxy
Dulux® Durebild® STE is a versatile, two-pack, high solids epoxy that can be easily applied by spray in shop and by brush and roller on site. Durebild® STE’s surface tolerant feature makes it an excellent universal tie-coat over previously painted surfaces or as a spot-primer and intermediate coat over power tool cleaned steel. The high build characteristics allow you to apply Durebild® STE to higher film builds with fewer coats, saving you time and money.